Read about benefits of Simultaneous Ring and how it works.

Simultaneous Ring allows two other phone numbers to ring simultaneously, in addition to the primary line; for instance, a cellular, office number, or another residential number.

Instructions – Access from the Primary Line

Dial access code *22 to access the service.

To turn Simultaneous Ring On or Off:

Press 3, followed by the pound sign (#).

To add a phone number (10 digits).

Press pound (#).

To remove a phone number.

Press star (*).

To clear all phone numbers on your list.

Press 08.

To hear the phone numbers on the list.

Press 1.
After each number, press 07 to delete the number.

To hear the instructions again.

Press zero (0).

You can program up to two phone numbers on your list. These numbers will ring at the same time as your primary line when someone calls the primary line. However, if you program a long distance telephone number and that there are calls at this number, long distance rates will be charge to the telephone number on which the option of SimRing is installed.

Example:

Primary line:

Number in Timmins

Programmed number:

Cell phone number in Timmins

Result:

No matter where you and your cell phone are (Timmins, New Liskeard, Montréal, Toronto, etc.), it will ring at the same time as your primary line in Timmins. The first to answer takes the call!

Instructions - Remote Access^{1 (footnote)}

• Dial the local access number (705-xxx-xxxx) that you were given when you subscribed.
• Input your 10-digit "pilot directory number", namely the telephone number on which the Simultaneous Ring option is installed.
• Enter your personal identification number (PIN). If you are accessing the service for the first time, please enter the temporary PIN that you were given when you subscribed.
• Follow the system prompts to access the functions described above.

Instructions - Personal Identification Number (PIN)

You can change your PIN at any time. You must access the system from the primary line on which the service is installed (the PIN cannot be changed from another line):

Dial access code *23 to access the PIN functions.

• Dial the local access number to Simultaneous Ring (press *22).
• Follow the system prompts.
• The system will pause to allow you to choose an option.
• The PIN must contain between 2 and 10 digits.
• To speed up system navigation, you can enter numbers while the message is playing. Press pound (#) after each entry.

Available where technology allows.

¹Instructions on how to use Simultaneous Ring are available in English only when instructions are accessed from a number other than the primary line on which the service is installed